Availability: | |
---|---|
Quantity: | |
DINGMIAO
Product Video
Product Show
PDO is an abbreviation of polydioxanone which widely used as surgery stitch thread and it is very safe to human body. As a colorless biodegradable synthetic polymer, it is a monofilament, so hydrolyzed in body and then naturally excreted by urine. PDO procedure leads to mechanotransduction within skin by forming vector among the threads. This treatment is featured with high safety, adjustability, short-term response. Once the thread is absorbed, the collagens starts to grow and this will be last 2 years at most.
Product Usage
The thread can be applied to anywhere on the body, such as a flabby face, cheeks, eyebrows, to prevent eye bags, sagging neck skin, fine lines around Cheeks, angle around the mouth, laugh lines, forearm and abdomen, smokers lines and lifting of breast.
Product Advantages
About 9 months after treatment, the filaments will dissolve, but the results will still last for many months. I recommend that you repeat this step within 6-9 months after the first step to get results up to 3 years.
PDO line can be used for lifting, revitalizing (improving skin texture and wrinkles), plumping and even reducing fat. Different threads serve different purposes.
After about 1 week, you will look more natural
Can be used on the face, or on various parts of the body whose main purpose is to improve rather than restore strength.
How It Works
1. Determine the number of thread and treatment area on the face.
2. Inject the Anesthetic on the treatment area.
3. Make punching with needle, insert the cannula and then pilfer the inner part of cannula.
4. Pull the thread out from the needle and Insert the thread (by taking direction the part of thread to be inserted first into the skin) into the cannula which is put on the face.(Use a cannula to make tunnel for the thread and insert the thread)
5. Pull out the inserted cannula after treatment done, as holding the end of Cog thread inserted into the face.
6. Press the treatment area in order to get well the thread stuck in the skin.
7. Make Sure thread does not come out from the skin and then, Cut off the remaining part of thread as holding tighten the thread of outside of skin
8. Press slightly up and down around the punctured skin.
Model & Size
Mono Thread
Product Name | Needle Gauge/Size | Thread Length | USP | |
Mono | 26G | 38mm | 50mm | 5-0 |
60mm | 70mm | 5-0 | ||
90mm | 130mm | 5-0 | ||
27G | 38mm | 50mm | 5-0 | |
50mm | 70mm | 5-0 | ||
29G | 38mm | 50mm | 6-0 | |
50mm | 70mm | 6-0 | ||
60mm | 90mm | 6-0 | ||
30G | 25.4mm | 30mm | 7-0 | |
38mm | 50mm | 7-0 |
Mono Screw
Product Name | Needle Gauge/Size | Thread Length | USP | |
Mono Screw | 25G | 90mm | 130mm | 5-0 |
26G | 38mm | 50mm | 5-0 | |
60mm | 90mm | 5-0 | ||
27G | 38mm | 50mm | 5-0 | |
50mm | 70mm | 5-0 | ||
29G | 38mm | 50mm | 6-0 | |
50mm | 70mm | 6-0 |
Tornado
Product Name | Needle Gauge/Size | Thread Length | USP | |
Tornado | 26G | 38mm | 50mm | 5-0 |
60mm | 90mm | 5-0 | ||
90mm | 130mm | 5-0 |
Tornado Screw
Product Name | Needle Gauge/Size | Thread Length | USP | |
Tornado Screw | 26G | 38mm | 50mm | 7-0 |
60mm | 90mm | 7-0 | ||
90mm | 130mm | 7-0 | ||
27G | 38mm | 50mm | 7-0 | |
50mm | 70mm | 7-0 | ||
60mm | 90mm | 7-0 | ||
90mm | 130mm | 7-0 |
Cog Threads
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 3-1 | 21G | 60mm | 75mm | 3-0 |
100mm | 150mm | 3-0 |
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 4-1 | 19G | 100mm | 150mm | 1-0 |
21G | 100mm | 150mm | 3-0 |
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 5-1 | 21G | 60mm | 70mm | 2-0 |
100mm | 150mm | 2-0 |
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 3D | 19G | 100mm | 150mm | 1-0 |
21G | 60mm | 75mm | 3-0 | |
100mm | 150mm | 3-0 |
Cog Half Cannula
Product Name | Needle Gauge/Size | Thread Length | USP | |
Cog 3-1 L Nose Thread | 19G | 25mm | 30mm | 2-0 |
19G | 50mm | 70mm | 2-0 | |
Cog 4-1 L | 19G | 100mm | 150mm | 2-0 |
21G | 100mm | 150mm | 3-0 | |
Cog 3D L | 19G | 100mm | 150mm | 2-0 |
21G | 100mm | 150mm | 3-0 | |
Cog 4D L | 19G | 100mm | 150mm | 2-0 |
21G | 100mm | 150mm | 3-0 |
Cog Blunt Cannula
Product Name | Needle Gauge/Size | Thread Length | USP | |
Cog 4D | 19G | 100mm | 150mm | 2-0 |
Mono Blunt | 30G | 25.4mm | 30mm | 7-0 |
Double Needle Thread
Product Name | Needle Gauge/Size | Thread Length | |
Double Needle Thread | 19G | 110mm | 290mm |
19G | 110mm | 480mm |
Product Package
inner packaging
Outer packaging
Product Video
Product Show
PDO is an abbreviation of polydioxanone which widely used as surgery stitch thread and it is very safe to human body. As a colorless biodegradable synthetic polymer, it is a monofilament, so hydrolyzed in body and then naturally excreted by urine. PDO procedure leads to mechanotransduction within skin by forming vector among the threads. This treatment is featured with high safety, adjustability, short-term response. Once the thread is absorbed, the collagens starts to grow and this will be last 2 years at most.
Product Usage
The thread can be applied to anywhere on the body, such as a flabby face, cheeks, eyebrows, to prevent eye bags, sagging neck skin, fine lines around Cheeks, angle around the mouth, laugh lines, forearm and abdomen, smokers lines and lifting of breast.
Product Advantages
About 9 months after treatment, the filaments will dissolve, but the results will still last for many months. I recommend that you repeat this step within 6-9 months after the first step to get results up to 3 years.
PDO line can be used for lifting, revitalizing (improving skin texture and wrinkles), plumping and even reducing fat. Different threads serve different purposes.
After about 1 week, you will look more natural
Can be used on the face, or on various parts of the body whose main purpose is to improve rather than restore strength.
How It Works
1. Determine the number of thread and treatment area on the face.
2. Inject the Anesthetic on the treatment area.
3. Make punching with needle, insert the cannula and then pilfer the inner part of cannula.
4. Pull the thread out from the needle and Insert the thread (by taking direction the part of thread to be inserted first into the skin) into the cannula which is put on the face.(Use a cannula to make tunnel for the thread and insert the thread)
5. Pull out the inserted cannula after treatment done, as holding the end of Cog thread inserted into the face.
6. Press the treatment area in order to get well the thread stuck in the skin.
7. Make Sure thread does not come out from the skin and then, Cut off the remaining part of thread as holding tighten the thread of outside of skin
8. Press slightly up and down around the punctured skin.
Model & Size
Mono Thread
Product Name | Needle Gauge/Size | Thread Length | USP | |
Mono | 26G | 38mm | 50mm | 5-0 |
60mm | 70mm | 5-0 | ||
90mm | 130mm | 5-0 | ||
27G | 38mm | 50mm | 5-0 | |
50mm | 70mm | 5-0 | ||
29G | 38mm | 50mm | 6-0 | |
50mm | 70mm | 6-0 | ||
60mm | 90mm | 6-0 | ||
30G | 25.4mm | 30mm | 7-0 | |
38mm | 50mm | 7-0 |
Mono Screw
Product Name | Needle Gauge/Size | Thread Length | USP | |
Mono Screw | 25G | 90mm | 130mm | 5-0 |
26G | 38mm | 50mm | 5-0 | |
60mm | 90mm | 5-0 | ||
27G | 38mm | 50mm | 5-0 | |
50mm | 70mm | 5-0 | ||
29G | 38mm | 50mm | 6-0 | |
50mm | 70mm | 6-0 |
Tornado
Product Name | Needle Gauge/Size | Thread Length | USP | |
Tornado | 26G | 38mm | 50mm | 5-0 |
60mm | 90mm | 5-0 | ||
90mm | 130mm | 5-0 |
Tornado Screw
Product Name | Needle Gauge/Size | Thread Length | USP | |
Tornado Screw | 26G | 38mm | 50mm | 7-0 |
60mm | 90mm | 7-0 | ||
90mm | 130mm | 7-0 | ||
27G | 38mm | 50mm | 7-0 | |
50mm | 70mm | 7-0 | ||
60mm | 90mm | 7-0 | ||
90mm | 130mm | 7-0 |
Cog Threads
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 3-1 | 21G | 60mm | 75mm | 3-0 |
100mm | 150mm | 3-0 |
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 4-1 | 19G | 100mm | 150mm | 1-0 |
21G | 100mm | 150mm | 3-0 |
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 5-1 | 21G | 60mm | 70mm | 2-0 |
100mm | 150mm | 2-0 |
Product Name | Needle Gauge/Size | Thread Length | USP | |
COG 3D | 19G | 100mm | 150mm | 1-0 |
21G | 60mm | 75mm | 3-0 | |
100mm | 150mm | 3-0 |
Cog Half Cannula
Product Name | Needle Gauge/Size | Thread Length | USP | |
Cog 3-1 L Nose Thread | 19G | 25mm | 30mm | 2-0 |
19G | 50mm | 70mm | 2-0 | |
Cog 4-1 L | 19G | 100mm | 150mm | 2-0 |
21G | 100mm | 150mm | 3-0 | |
Cog 3D L | 19G | 100mm | 150mm | 2-0 |
21G | 100mm | 150mm | 3-0 | |
Cog 4D L | 19G | 100mm | 150mm | 2-0 |
21G | 100mm | 150mm | 3-0 |
Cog Blunt Cannula
Product Name | Needle Gauge/Size | Thread Length | USP | |
Cog 4D | 19G | 100mm | 150mm | 2-0 |
Mono Blunt | 30G | 25.4mm | 30mm | 7-0 |
Double Needle Thread
Product Name | Needle Gauge/Size | Thread Length | |
Double Needle Thread | 19G | 110mm | 290mm |
19G | 110mm | 480mm |
Product Package
inner packaging
Outer packaging